Display Icons And Symbols - iDect Eclipse Plus User Manual

In menu mode, press to scroll down.
During a call, or message playback, press
PHONE BOOK,
to decrease the volume.
VOLUME ‐, DOWN
In standby mode, press to access the
-
phonebook list.
During pre‐dialling, press to delete the last
digit entered.
During a call, press to end the call.
POWER ON/OFF,
During programming, press to cancel and
PHONE OFF
exit without making changes.
O
In standby mode, press and hold to power
the handset on/off.
In standby mode, press and hold to turn
the handset ringer on/off.
RINGER ON/OFF,
Press and hold to add a dialling pause
#
PAUSE, #
when dialling or entering numbers into the
phonebook.
I
In standby mode or during a call, press to
INTERCOM (INT)
initiate an intercom call or transfer a call.
R
In standby mode, press to access the redial list.
REDIAL
Lights up in Green when the answering
machine is on.
Flashes if there are new messages.
Flashes rapidly if the answering machine
memory is full.
Lights up in Red when a handset is on the
base to indicate it is charging.
Press to find/page all registered handsets.
Press the button again, or any key on the
(PAGE or
handset to turn off the page signal.
HANDSET LOCATE)
Press and hold to start registration process.
13
3.3 Display Icons and Symbols
The home screen gives you information on the current status of the phone.
Icon Meaning
Displays when the battery is fully charged.
Internal segments cycle while charging.
Displays when the line is in use.
Flashes when there is an incoming call.
Flashes when you have a new voicemail message.
(This is a caller display service and is not usually
available from UK network providers.)
Displays when you have new missed calls, or the
call log is being viewed.
Displays when the phonebook is accessed.
Displays when the alarm is set.
Displays when handset ringer is turned off.
Displays when the handset is registered and
within range of the base station.
Flashes when the handset is out of range and is
searching for a base.
Displays when the answering machine is on.
Flashes slowly when there are new answering
machine message(s) or when the answering
machine memory is full.
14