Settings; Change The Master Pin; Handset Registration; Register Additional Handsets - iDect Eclipse Plus User Manual

9 SETTINGS
9.1 Change the Master PIN
The Master PIN is used for registration/deregistration of handsets and
for accessing the answering machine remotely. The default Master PIN
number is 0000. The maximum length of the Master PIN is 8 digits.
Note: If you forget your PIN code, you can reset it to its default 0000
using a handset Reset function.
1. From the home screen, press
+ -
2. Press or
to select.
M
3. Press to select CHANGE PIN.
4. Enter the current Master PIN and then press
• The PIN will be shown as asterisks (*) on the screen as you
enter them.
5. Enter the new PIN and then press
• A confirmation tone is played.
O
6. Press to return to the home screen.
9.2 Handset Registration
IMPORTANT: When you purchase your phone system, all handsets are
already registered to your base, so you do not need to register them.
Handset registration is only necessary when you buy extra handsets or if
a handset has become faulty.
You can register up to four handsets to one base station, with each
handset's number (1 to 4) shown on its display.
Note: Each handset can only be registered to one base.
You need to enter the Master PIN before you can register or deregister
handsets. The default Master PIN is 0000.
M
.
to select SETTINGS and then press
M
to confirm.
M
to confirm.
41
9.3 Register Additional Handsets
1. Press and hold the under the base unit for approximately 5 seconds.
• The message indicator on the base will flash for up to 1
minute, while it is in registration mode.
2. On the handset, press
+
3. Press
+
4. Press
M
5. Enter the Master PIN and then press
Note: After entering the Master PIN on the handset,
• WAITING flashes on the screen.
• A confirmation tone is played to indicate successful registration, and the
handset returns to standby mode, with its handset number displayed.
• If no base is found with the entered PIN, error tones are played to
indicate failed registration and PLS REG H/S is displayed on the
screen. You will need to repeat from step 1 above.
• During steps 2‐5, if no key is pressed on the handset within 10
seconds, the registration procedure will be aborted. If this happens,
repeat from step 1 above.
9.4 Deregister Your Handset
You can deregister the handset you are using, or any other handset
registered to the same base. The default Master PIN is 0000.
1. From the home screen, press
+
2. Press
+
3. Press
4. Enter the Master PIN and then press
+
5. Press
deregister and then press
the deregistration procedure.
M
.
-
or to SETTINGS and then press
-
or to REGISTRATION and then press
M
M
.
-
or to SETTINGS and then press
-
or to DEREGISTER and then press
M
-
or to select the handset number you want to
M
to confirm, or press
42
M
to select.
M
to select.
to confirm.
M
to select.
M
to select.
to confirm.
m
to cancel