Block Mode; Answering Machine; Turning The Answering Machine On/Off - iDect Eclipse Plus User Manual

10.3.4 Block Mode
When the BLACKLIST ON/OFF function is set ON, there are two options
for BLOCK MODE:

CID/TAM ON ‐ when you receive a call from a BLACKLIST
number, your phone will not ring, but the display backlight
will turn on and show the calling number, and the
answering machine will answer the call after its set number
of rings if it is turned on.

CID/TAM OFF ‐ when you receive a call from a BLACKLIST
number, your phone will not ring, the display backlight will
not turn on or show the calling number, and the answering
machine will not answer the call.
Warning: The phone will give no indication that there is an
incoming call, so if you pick up the handset to make a call
you may answer a Blacklist call.
1. From the home screen, press
+ -
2. Press or
M
3. Press to select, then
M
4. Press to select, then
M
5. Press to select and then press
CID TAM ON or CID TAM OFF.
• CID/TAM ON: no ring, but backlight and caller display when a
blacklist call is received.
• CID/TAM OFF: no indication at all when a blacklist call is
received.
M
6. Press to confirm.
• A confirmation tone is played.
O
7. Press to return to standby mode.
M
.
to show CALL BLOCKER
+ -
or to show BLACKLIST.
+ -
or for BLOCK MODE.
+ -
or
55
11 ANSWERING MACHINE
Your phone includes a telephone answering machine that records
unanswered calls when it is on.
The answering machine can store up to 59 messages within the
maximum recording time of approximately 30 minutes and each
message can be up to 3 minutes long.
When the answering machine is on, calls are answered after the set
RING DELAY.
If you have selected RECORD MSGS, then the caller can leave you a
message after hearing your announcement.
If you have selected ANSWER ONLY mode, the caller can only listen to
your announcement but cannot leave you a message.
If the answering machine memory is full, the answering machine
LED on the base flashes rapidly, the answering machine icon on the
handset flashes slowly, and the ANSWER ONLY announcement will
be played to new callers. You will have to delete some messages
before any new ones can be recorded.
11.1 Turning the Answering Machine On/Off
1. From the home screen, press
2. Press
3. Press
4. Press
to confirm.
• A confirmation tone is played.
to select
5. Press
Note: If the answering machine is OFF and the Master PIN is still set at its
default 0000, the answering machine will not answer any incoming calls.
However, if the Master PIN has been changed and Remote Access is
activated, it will answer incoming calls after 14 rings to allow remote
access, and the ANSWER ONLY announcement will play. (See Remote
Access.)
M
M
again to select ANS. SYSTEM.
+ -
or to ANS. ON/OFF and then press
+ -
or to select ON or OFF and then press
O
to return to standby mode.
56
.
M
to select.
M