Transfer An External Call To Another Handset; Phonebook; Store A Contact In The Phonebook - iDect Eclipse Plus User Manual

Note: If there is no answer from the called handset, or you wish to
cancel the intercom call before it is answered, press
the external call.
T
Press on the called handset to answer the internal call, where both
internal callers can talk.
When the intercom call is connected, you can choose from the following
options on the originating handset:
I
1) Press and hold
the call in conference mode.
O
2) Press on handset to terminate the intercom on that handset,
and leave the external call connected to the other handset.
4.14 Transfer an External Call to another Handset
I
1. During the call, press
• Intercom is established immediately if there are only 2
registered handsets.
• If there are more than 2 registered handsets, the handset
numbers which are available for intercom will be displayed.
2. Press the handset number you wish to call or press
handsets.
Note: If there is no answer from the called handset, or you wish to
cancel the intercom call before it is answered, press
the external call.
T
3. Press on the called handset to answer the internal call,
where both internal callers can talk.
O
4. Press on the originating handset to transfer the external call
to the called handset.
• The external call is transferred
I
to return to
for 2 seconds to connect both handsets to
to put the external call on hold.
*
I
to return to
23
5 PHONEBOOK
The handset can store up to 200 phonebook entries. Each phonebook
entry can have a maximum of 24 digits for the phone number and 12
characters for the name.
5.1 Store a Contact in the Phonebook
1. From the home screen, press
+
2. Press
3. Press
• The screen displays ENTER NAME.
4. Enter the name of the contact (maximum 12 characters) using the
keypad.
If you make a mistake, press
5. Press
• The screen displays ENTER NUMBER.
6. Enter the number of the contact (maximum 24 digits) using the
keypad.
to call all
If you make a mistake, press
7. Press
• A confirmation tone is played.
8. Press
Note:
You cannot store a new phonebook entry when the memory is full. In this
case, you have to delete existing entries to make space for new ones.
When storing the number for a local call, you can enter only the 6 or
7‐digit local number without STD (area) code, and it will still display
the name if there is an incoming call and you subscribe to caller
display.
M
-
or to PHONEBOOK and then press
M
to select NEW ENTRY.
m
to delete the last character entered.
M
to confirm the name entry.
m
to delete the last digit entered.
M
to confirm.
O
to return to standby mode.
24
.
M
to select.