Dnd (Do Not Disturb); Dnd On/Off Setting; Start & End Time Setting - iDect Eclipse Plus User Manual

10.2 DND (Do Not Disturb)
The DND menu allows you to set different blocking conditions.
The Eclipse Plus telephone will not ring if a blocked call is received, but
the backlight will still turn on, and if the answering machine is turned
on it will answer the call after its set number of rings.
Two DND MODES can be set:
BLOCK ALL – all calls will be blocked
ALLOW W.LIST – only WHITELIST entries will be allowed, with all
other calls blocked.
Except for BLOCK ALL, the call blocking will only work if you subscribe
to the Caller Display Service and the phone receives calling number
information.
10.2.1 DND On/Off Setting
The DND ON/OFF default setting is OFF. If you set DND ON/OFF to ON,
DND ON will appear on the handset screen, and your phone will not
ring when it receives a blocked call, but will still show the caller id.
1. From the home screen, press
+ -
2. Press or
M
3. Press to select and then
M
4. Press to show DND ON/OFF, and then
+ -
5. Press or
• ON: your phone will not ring when it receives a call
• OFF: your phone will ring when it receives a call
M
6. Press to confirm.
• A confirmation tone is played.
O
7. Press to return to standby mode.
M
.
to show CALL BLOCKER
+ -
or to show DND.
M
to select.
to select ON or OFF.
47
10.2.2 Start & End Time Setting
The default setting for the START & END time is with both set to 00:00, so
that when DND is turned on it will be active all the time.
You can set them to different times if you only want the DND to be active
for part of each day (for example: start time: 10:00, end time: 12:00 if
you do not want to be disturbed by calls between 10:00 and 12:00.) DND
ON will appear on the handset screen during the timed DND period.
Note: If DND ON/OFF is ON, with set START & END times, and you set the
DATE & TIME in CLOCK&ALARM, when your phone receives its first call,
the caller id service may update the date and time shown on the handset
screen, and your phone may still ring , but subsequent blocked calls
during the DND period will not ring.
1. From the home screen, press
+ -
2. Press or
M
3. Press to select, then
M
4. Press to select, then
M
5. Press to select and show START.
M
6. Press and enter the time for when you want the DND to start.
M
7. Press to confirm and then
M
8. Press and enter the time for when you want the DND to end.
• Note: see 7.1 for how to enter times in 12 or 24‐hour modes.
M
9. Press to confirm.
• A confirmation tone is played.
O
10. Press to return to standby mode.
M
.
to show CALL BLOCKER.
+ -
or to show DND.
+ -
or to START & END.
+ -
or to show END.
48