Content SAFETY INFORMATION WARRANTY REGULATORY NOTICE IMPORTANT NOTICE SPECIFICATION NOMENCLATURE MAGING EE THE GEL THROUGH THE AMBER FILTER NOMENCLATURE PANASONIC GF7 INSTALLATION OF THE EQUIPMENT ® OPERATING THE FASTGENE FAS DIGI IMAGING SYSTEM TRANSFERRING AND SAVING THE IMAGES APPENDIX A 1. GF-7 ETTING UP THE ANASONIC...
Create a potential safety hazard Nippon Genetics Europe is not responsible for any injury or damage caused by the use of this instrument for purposes other than those for which it is intended, or by modifications of the instrument not performed by Nippon Genetics Europe or an authorized agent.
4. IMPORTANT NOTICE ® Please, read the installation instruction carefully before installing the FastGene Blue/Green ® LED Transilluminator and the FastGene FAS Digi Imaging System. This instrument is intended for clinical and research laboratory use with DNA gel activation and it must be operated only by specialized personnel aware of the potential risks associated with the chemical and biological agents normally used with this unit.
6. Nomenclature (continued) Imaging The angle of the LCD screen can be adjusted b. See the gel through the amber filter Slide the camera holder backwards to open the filter compartment and see the gel through the filter...
Installation of the equipment Please read carefully the following instructions to ensure a proper installation of the equipment. a. Preparing the camera Please charge the battery of the camera before using the imaging system Remove the cap of the camera lens III.
® 8. Operating the FastGene FAS Digi Imaging system A = Aperture Turn the mode dial to “Aperture” Open the front door of the dark box Insert the gel Close the front door of the dark box Adjust the angle of the Panasonic GF-7 display as required and switch the camera on Adjust the zoom level using the zoom adapter and exposure compensation (-1 is recommended) to the...
9. Transferring and saving the Images View the taken images by entering the playback mode: press the playback button. Switch between images by turning the wheel Delete unwanted images by pressing the Playback delete button. Delete ® Switch off the FastGene Blue/Green Transilluminator and the Panasonic GF7 .
Appendix A 1. Setting up the Panasonic GF-7 ® The camera is preinstalled with the optimal settings for the FastGene FAS Digi Imaging system. In case the settings are lost, press the Menu button and use the following setup: RECORDING MENU 1 Photo Style Mono No Effect...
A 2. How to print your images ® There are two possibilities to print the images taken with the FastGene FAS Digi imaging system: Printing directly from the SD-card a. Remove the SD card from the camera, as described in Section 10. b.