Makita HR140D Instruction Manual page 10

3. Install the dust cup set so that the claws of the
dust cup fit in in the slits on the spacer.
1
2
► 1 . Dust cup 2. Claws
NOTE: If you connect a vacuum cleaner to the dust
cup set, remove the dust cap before connecting it.
1
► 1 . Dust cap
Removing the drill bit
To remove the drill bit, pull the chuck cover down all the
way and pull the drill bit out.
2
► 1 . Bit 2. Chuck cover
Removing the dust cup set
To remove the dust cup set, follow the steps below.
1. Loosen the side grip.
► 1 . Side grip
10 ENGLISH
1
1