Installing Memory Modules; Tools Required; Maximum Memory; Preparing The Computer - Texas Instruments TravelMate 6100 Series User Manual

Tools required

Maximum memory

Preparing the
computer
Locating the
keyboard latches

Installing Memory Modules

• Small, flat-blade screwdriver
• Wrist grounding straps (recommended)
Your computer has three slots for memory
modules and comes with a 32-MB module
standard in slot 2. The other two slots hold
8-MB or 32-MB modules. This gives your
computer a maximum possible memory of
96 MB.
Note: The computer is not compatible with
16-MB memory modules.
The installation procedure involves opening up
the computer. Before proceeding, follow these
steps to protect yourself and your computer.
1. Turn off the computer.
2. Disconnect the AC adapter from the
computer.
3. Remove all battery packs.
4. Ground yourself following the instructions
on the previous page.
The keyboard has three small plastic latches
that hold it in place. These latches are along the
rear of the keyboard.
Installing Internal Accessories 3-3
Installing Memory Modules