Package Contents - Sander XT2000 User Manual

Introduction
Congratulations on your purchase of this
Sander quality product. We are confident
that you will be satisfied with this ozonizer.
Our many years of experience in aquarium
technology will benefit you in every detail.
Please familiarize yourself with the ozonizer
before using it for the first time — by reading
this user guide and paying particular attention
to the safety instructions. The ozonizer may
only be used for the specific purposes described
below. Please keep this user guide handy for
future reference, and include this guide when
handing the ozonizer over to a third party.

Package contents

Immediately after unpacking, please make sure
the following items are included in the package,
and in flawless condition:
⇒ Ozonizer XT2000
⇒ Power supply
⇒ Power cable
⇒ Adapter cable for connecting the
Sander Redox Controller
⇒ Hex-tip (Allen™) tool
⇒ Mounting hooks (2×)
⇒ Mounting dowels (2×)
⇒ User guide
Notification and hazard symbols
!
Important information
Caution — Danger
Caution — Electric shock hazard
Intended use
for aquariums and ponds
The ozonizer is a device for generating ozone
from air. It was developed specifically for use
with aquariums and ponds.
When operated with dry air, the ozonizer has
a rated output of 2000 milligrams (2 grams;
0,07 oz.) of ozone per hour. When using
ambient air (40 – 80 % humidity), ozone output
is reduced by about half.
Ozone must be released into the water at a
depth of no less than 20 cm (8 in).
We recommend using a skimmer, such as our
Helgoland series devices (for salt water), or
Fresh-Skim (for fresh water).
Other uses or device modifications are
considered non-intended use and may result
in injuries and/or damage to the ozonizer. The
manufacturer assumes no liability for damages
resulting from non-intended use.
The device is not intended for commercial use.
Caution — Hot surfaces
Caution — Hazardous substances