Table of Contents
Advertisement
Button
Network Status/
㉓
Navigation Button/Reset
Working Status Shift
⑬
Button
2.Setup Your Camera
2.1 Get the Camera Ready
1) Power Charge
The camera is provided with 2 built-in rechargeable batteries. For full performance of the
camera, please charge the batteries full by DC with the provided power adaptor in the box
before you use the camera.
Note:
There is an insulation paper inserted in the battery compartment, please pull it out at
your first time of use. If it is too tight to pull out, please unscrew the battery compartment cover,
and remember to screw it back for the best waterproof effect.
The power charging indicator light will turn green when the camera battery is fully charged.
To check network status; to navigate to next options; to reset
the camera when pressing up to 15 seconds.
When it is pressed down by close of the camera cover, the
camera enters into auto photo/video taking mode;
When it is released by opening of camera cover, and the
camera screen lights up for previewing / programming/
manual test.
Note:
The camera will auto turn off when there is no operation
at the main interface more than 3 minutes.
2
Advertisement
Table of Contents
