Table of Contents
Advertisement
4) What are the factors to consider before you connect the camera to another WiFi?
a.
Reset the existing WiFi on camera first;
b.
Make sure the camera WiFi (DefendX_******) is not connected by other mobile
devices; If yes, please ignore it on your mobile device;
c.
Details of the WiFi router to configure with are accurate;
d.
The mobile phone to configure has normal access to network.
5) How to confirm the camera is well connected with WiFi network?
a.
When camera screen is on, press the Right Navigation button. If the IP shows
192.168.1.xxx and the WiFi is the one you configured it to, then it's well connected.
b.
After the camera is added and configured to network, manually press OK button to
take a photo and send, then check on mobile App to see if it is well received.
6) When the camera screen is on, does it take and send photos/videos as preset
working mode (PIR Motion Detection/Time Lapse)?
No. When the camera screen turns on, it enters previewing/ programming/manual test
mode, and under this mode, the camera responds to button operations but not PIR
motion triggers and time lapse settings.
7) What are the effective ways to light up the screen when it turns off automatically?
a.
Close the camera cover and unlock it again, the screen will light up;
b.
Directly press the soft Working Status Shift Button to wake up the screen;
c.
Turn off the Power Switch button and turn on again.
8) How about if I want to add the cameras with another DefendCam account?
a.
Please make sure the camera is not added by other account. If it is already added,
please delete it in previous account (Take this step cautious since delete of the camera
means delete of its photos stored on the cloud)
b.
Reset the existing WiFi on camera
c.
Make sure the camera WiFi (DefendX_******) is not connected by other mobile
devices; If yes, please ignore it on your mobile device.
23
Advertisement
Table of Contents
