Advertisement
warninG! The high pressure jet will cause loose particles to be propelled at high speed, which may cause serious injury.
‰
warninG! Do not operate the machine without a water supply. dry running can seriously damage the unit.
‰
warninG! Do not leave the washer switched on for more than 15 minutes without operating the trigger.
‰
Do not obstruct ventilation grilles during operation.
8
Do not use the washer with flammable or toxic liquids or any other product. Use only recommended detergent. Unapproved
8
detergents may corrode the machine cover and accessories.
Do not jam the trigger in the operating position.
8
Do not adjust any internal control valves, as they have been factory set.
8
Do not connect other appliances to the machine inlet or outlet.
8
Do not use hoses and fittings other than those designed for use with this machine.
8
Do not move the unit by pulling the hoses or electrical cables. use the handle and transport by means of the wheels.
8
Do not touch plug with wet hands. to avoid the risk of electrocution keep all connections dry and off the ground.
8
Do not direct jet against yourself, other persons, animals, electrical equipment or the machine itself.
8
Do not use washer if you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
Do not allow children or untrained persons to operate the washer.
8
warninG! Discharge residual pressure before disconnecting the washer hose. Pressure left in unit may cause injury.
‰
After use, disconnect washer from electrical mains and water supply and store in a safe, dry, childproof area.
9
Protect from freezing conditions during winter.
9
note: this appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or
lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a
person responsible for their safety. children should be supervised to ensure that they do not play with the appliance.
2. introDuCtion
semi-professional, heavy-duty unit for extensive domestic and light commercial use. fitted with powerful induction motor (for motor power and
pump performance see 'specifications'). Features automatic Total Stop System (TSS) which switches the motor on and off when the lance trigger
is operated, prolonging the motor life. Also fitted with high quality polished chrome and brass fittings. Features hose hanging hook, accessory
storage on the back of the unit and side mounted gun and lance holder ensuring the unit stays clutter free and fully mobile. supplied with
variable nozzle, 5mtr hose and rotablast nozzle which helps develop the same effective cleaning Power (ecP) as a larger pressure washer (for
delivery pressure see 'specifications'). Fitted with heavy-duty composite wheels for transportation over rough terrain.
model No. PW2200 features dual built-in dual detergent tanks, enabling the user to switch between two different cleaning products by simply
using the detergent selection control. E.g: General Purpose Detergent, Model No's AK130 or AK131 and Traffic Film Remover, Model No's
AK132 or AK133.
3. speCiFiCation
Model no: ............................................................. pw2200
maximum Pressure: ................................... 140bar/2030psi
effective cleaning Pressure (ecP) ............ 257bar/3727psi
Water Flow: ............................................................ 400ltr/hr
motor Power: ............................................................1800W
supply: ................................................................230V~13A
total stop system (tss): .............................................. Yes
rotablast nozzle: .......................................................... Yes
Hose length: ................................................................ 5mtr
Weight: ..................................................................... 17.2kg
Model no: ............................................................. pw2500
maximum Pressure: ................................... 170bar/2350psi
effective cleaning Pressure (ecP) ............ 275bar/3995psi
Water Flow: ............................................................ 438ltr/hr
motor Power: ............................................................2200W
supply: ................................................................230V~13A
total stop system (tss): .............................................. Yes
rotablast nozzle: .......................................................... Yes
Hose length: ................................................................ 5mtr
Weight: ..................................................................... 19.7kg
4. set up
4.1.
ConneCtinG the water supplY
4.1.1.
Use a reinforced hose pipe with an internal diameter of 1/2" and connect to the mains water supply. Before attaching the hose to the
pressure washer flush the hose through with some clean water to remove any foreign matter from within the hose.
4.1.2.
connect female quick connection hose fitting to inlet on the front of the machine (fig.1)
4.2.
ConneCtinG the hiGh pressure hose (pw2200 onlY)
4.2.1.
insert the high pressure hose into the hose fitting at the lower rear of the machine and screw the collar onto the threaded outer (fig.2)
ensuring the connector is tight. The PW2500 is pre-connected via the inside of the hose storage reel.
4.2.2.
Attach the other end of the high pressure hose to the gun (fig.3). to attach the hose, push the male hose connector into the underside
of the gun and screw the collar onto the gun fitting. ensure that the connection is tight to prevent leakage.
asseMblinG the lanCe anD nozzle
4.3.
4.3.1.
Push the nozzle into the gun as shown in fig.4 and screw the threaded male lance connector into the gun, again ensuring that the
connection is tight.
‰ ‰ warninG! Ensure the nozzle is locked into position, failure to ensure this could result in the nozzle being ejected under high pressure
‰
‰
when operating the gun.
4.4.
ConneCtinG to the Mains eleCtriCal supplY
‰ ‰ warninG! Ensure the On/Off switch is in the 'Off' position.
‰
‰
4.4.1.
using an rcd plugged into a 13A mains socket, Do not turn the power on. Do not touch the plug with wet hands.
© Jack sealey limited
pw2200
Original Language Version
pw2500
PW2200, PW2500 | Issue:4(L) 10/10/17
Advertisement
