Texas Instruments CC1000PP User Manual page 5

The value of the matching components, the VCO inductor and the LC filter will depend on the
operating frequency. Bills of materials are supplied for both versions. For operating
frequencies other than those listed here, please use the latest version of SmartRF
calculate the component values.
Pinouts for the connectors are given in the table below. The position of pin number 1 is
indicated on the top silkscreen of the PCB. An abbreviated description of the pin functions of
P1 is also printed on the silkscreen.
P1
Pin Function
1 PALE
2 PDATA
3 PCLK
4 DCLK
5 DIO
6 CHP_OUT / LOCK
Pin
1
2
3
4
5
6
Table 1. Connector pinouts
SWRU060
®
Studio to
P2
Function
GND
ANTENNA
GND
VDD (2.1 – 3.6 V)
RSSI / IF
GND
Page 5 of 11