Texas Instruments Calculator User Manual page 9

Changing the number of decimal places affects the display only. Except
for amortization and depreciation results, the calculator does not round
internal values. To round the internal value, use the round function. (See
"Rounding & o" on page 10.)
Note: All examples in this guidebook assume a setting of two decimal
places. Other settings might show different results.
Choosing the Angle Units
The angle unit value affects the display of results in trigonometric
calculations. When you select radians, the RAD indicator appears in the
upper right corner of the display. No indicator appears when you select
the default setting of degrees.
Using Dates
The calculator uses dates with the Bond and Date worksheets and the
French depreciation methods. To enter dates, use this convention:
mm.ddyy (US) or dd.mmyy (European). After you key in the date, press
!.
Choosing Calculation Methods
When you choose the chain (Chn) calculation method, the calculator
solves problems in the order that you enter them. (Most financial
calculators use Chn.)
For example, when you enter 3 H 2 < 4 N, the Chn answer is 20 (3 + 2 = 5,
5 * 4 = 20).
Using AOSé (algebraic operating system), the calculator solves problems
according to the standard rules of algebraic hierarchy, computing
multiplication and division operations before addition and subtraction
operations. (Most scientific calculators use AOS.)
For example, when you enter 3 H 2 < 4 N, the AOS answer is 11 (2 Q 4 =
8; 3 + 8 = 11).
Resetting Default Values
To reset default values for all of the calculator formats, press &
z with one of the formats displayed.
Overview of Calculator Operations 5