Table of Contents
Advertisement
Available languages
Available languages
_______________________________________________________________________________
Display:
4000 counts LCD display, 21mm high
Diode Test
voltage 2.8V DC typical
Temperature Sensor Requires type K thermocouple
AC True RMS:
represents the method of calculation of the voltage or
current value. Average responding multimeters are
calibrated to read correctly only on sine waves and
they will read inaccurately on non-sine wave or
distorted signals. True rms meters read accurately on
either type of signal.
ACV Bandwidth 40Hz to 1000Hz
Polarity:
Automatic, (-) negative polarity indication.
Over-range:
"OL" mark indication.
Low battery indication: A battery "
below the operating level.
Measurement rate: 2 times per second nominal.
Auto power off:
Meter automatically shuts down after approx. 30 minutes of inactivity.
Operating environment: -10 o C to 50 o C (14 o F to 122 o F) at < 70 % relative humidity.
Storage temperature: -30 o C to 60 o C (-4 o F to 140 o F) at < 80 % relative humidity.to
Relative humidity: 90% (0 o C to 30 o C); 75%(30 o C to 40 o C); 45%(40 o C to 50 o C);
For inside use, max height: Operating:3000m, Storage 10,000m
Pollution degree: 2
Safety:
The instrument complies with IEC/EN 61010-1:2001 and IEC/EN 61010-031:2002
Power:
One 9V battery , NEDA 1604, IEC 6F22.
Dimensions: 182 (H) x 82 (W) x55 (D) mm
Weight: Approx.: 375g.
©Copyright Abacanto Digital SA.
Test current of 0.9mA maximum, open circuit
The term stands for "Root-Mean-Square," which
"symbol is displayed when the battery voltage drops
Manual de usuario AD-9962
AD Instruments
37
Advertisement
Table of Contents
