Braun cruZer 5 BODY Manual page 7

Trimming the hair length with trimming combs «medium» and «long»
The trimming combs (1b) / (1c) allow you to cut the hair to 2 different
lengths («medium» = 3 mm or «long» = 8 mm).
Start with the «long» trimming comb (1c) to acquire practice. Gently
move the cruZer body against the direction of hair growth with the comb
tips pointing forward (picture c).
Combishave («1+2»):
•
Trimming and shaving in one stroke for a close shave of long haired
sections with the trimmer (2) and shaving system (3)
The combishave is suitable for large areas like chest and back.
Press the « » button and extend the slider to the «1+2» setting
(picture d).
Press the on/off switch (6) to turn on the cruZer body. The trimmer first
raises all long hairs and cuts them off. The shaving system (3) follows to
smooth away any stubble.
For best results, always make sure that both, the trimmer and the
shaving system are in contact with the skin. When using this function,
we recommend using Gillette shaving foam or gel.
For sensitive areas, we recommend starting with the «sensitive»
attachment (1a) and then finish with the shaving system (3).
Shave («2»):
•
For a close shave of stubbled areas with the shaving system (3)
Pressing the « » button, extend the slider (5) as far as it will go to
setting «2» (picture e).
Place the shaving system (3) on the stretched skin and gently move it
against the direction of hair growth.
Do not apply too much pressure and always keep your skin stretched.
Make sure the shaving system is in full contact with the skin.
When using the shaving system, we recommend using Gillette shaving
foam or gel.
Protection sleeve / holder for the shower
The cruZer body comes with a protective cover that can also be used as a
shower holder.
When used as a protective cover, insert the cruZer body with the trimmer
facing inwards.
When using it as holder, insert the cruZer body with the trimmer facing
outwards (see picture 9).
8