Wireless Dmx; Setting The Dmx Address - Ignition Pico IR / Wireless Manual

PI C O I R/ W I RELESS

4. Wireless DMX

Only available if you bought the version "Pico IR Wireless", otherwise you only can control the device
with the remote control.
LED display and its meaning
Permanently off = not connected to the transmitter
Permanently on = connected with the transmitter / DMX is transmitted
900ms on/ 100ms off = connected with the transmitter / No DMX signal
100ms on/ 100ms off = loose connection / Connection is perpared

4.1. Setting the DMX address

You can set the DMX address with the help of a binary system on the "Dipswitch".In this cause the
"Dip" 10 is the set function. Switch the "Dip" 10 to on to release the connection to the wireless solution
transmitter. Switch the "Dip" then again to off.
6 / 9