Important Safeguards; Instructions - Russell Hobbs Light and Easy Brights 24840-56 Instructions Manual

Read the instructions, keep them safe, pass them on if you pass the iron on.

IMPORTANT SAFEGUARDS

Follow basic safety precautions, including:
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been supervised/instructed and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be done by children unless they are older than 8 and
supervised. Use and store the appliance out of reach of children under 8 years.
Use the iron, or set it on its heel, on a stable, level, heat-resistant surface,
preferably an ironing board.
Don't leave the iron unattended while plugged in, or while it's standing on the
ironing board.
Unplug the iron before filling, before cleaning, and after use.
Don't operate the appliance if it's dropped or damaged, or if it malfunctions or
leaks.
If the cable is damaged, return the iron, to avoid hazard.
¬
The surfaces of the appliance will get hot during use.
• Don't put the appliance in liquid, don't use it in a bathroom, near water, or outdoors.
• Don't iron clothing while it's being worn – you'll injure the wearer.
• Don't use the appliance for any purpose other than those described in these instructions.
• Don't scratch the soleplate – avoid buttons, zips, etc.
• The appliance has a protective thermal fuse, which will blow if it overheats. If this happens,
the appliance will stop working, and must be returned for repair.
PARTS
1. Light
2. Temperature control
3. Water inlet
4. Cover
BEFORE USING FOR THE FIRST TIME
• Remove labels, stickers and packaging from the iron and soleplate.
• Don't worry if the iron smokes a bit at first, it'll stop as the element cures.
• Iron an old piece of cotton fabric, to clean the soleplate.
PREPARATION
Check for textile care symbols (i j k l).
1.
Iron fabrics needing low temperatures j first, then those that need medium
2.
temperatures k, and finish with those needing high temperatures l.
FILLING
You may use the iron with tap-water, but if you live in a hard water area, you should use distilled
water (not chemically descaled or softened water).
If you buy distilled water, check that it's suitable for use in irons.
1. Unplug the iron.
2. Set the temperature control to •.
3. Open the cover.
HOUSEHOLD USE ONLY
5.
6.
7.
8.
3
Spray nozzle
Soleplate
Reservoir
Heel