Related Manuals for logika WL-ZSPWBPWBPW-PI11-04
Summary of Contents for logika WL-ZSPWBPWBPW-PI11-04
- Page 1 Smart Retina Lock WL-ZSPWBPWBPW-PI11-04 Product Manual Version 1.0 © 2019 Logika Limited...
- Page 2 Introduction Thank you for choosing Logika. Please take a moment to carefully read through the manual to ensure safe and proper installation and use. • Before use, the product must be properly installed as described in this manual by a qualified technician.
-
Page 3: Packing List
Packing List Item Name Quantity Front Plate Back Plate Lock Body Accessories Package User Manual Hole Drilling Template Pencil Warranty Card Magnetic Card Door Frame Box Strike Plate... -
Page 4: Device Layout
Device Layout Microphone Camera LCD Screen Factory Reset Touch Screen Button NFC Sensor Doorbell Fingerprint Sensor PIR Motion Sensor Leave Home Button Double Lock Knob Back Plate Front Plate Emergency Power Keyhole Micro USB Port Bottom Profile... - Page 5 1. Front (outside facing) unit (1pc) 10. Link plate (1pc) 2. φ8 Connecting bolt (short) (1pc) 11. Countersink screw (2pcs) 3. Key link strip (1pc) 12. Back (inside facing) unit (1pc) 4. Φ6 Connecting bolt (1pc) 13. Pan head crew (2pcs) 5.
-
Page 6: Specifications
Features • Communication Mode: IEEE 802.15.4 Zigbee. Smart Doorbell to notify users of visitors. • • Smart night-vision camera with intercom, allows users to see who's at the door remotely and communicate with them. When people approach and linger longer than a pre-set time the camera will take video •... -
Page 7: Preparation Before Installation
Preparation Before Installation Prior to installing the door lock, you need to determine the opening direction of the door, as there are some adjustments that may need to be made to the lock body, door handle orientation and the spindle rotation direction. Don’t worry if you get it wrong, as it’s easy enough to remove the lock from the door and re-adjust, if necessary. - Page 8 Fittings for the Different Door Opening Directions The Smart Retina Lock components will need to have some adjustments made to cater for the different opening directions of the door. The diagrams below illustrate the basics before we delve into the details of the adjustments. RIGHT OUTWARD OPENING Bevel faces towards...
- Page 9 LEFT OUTWARD OPENING Bevel faces towards inside Triangle faces towards outside Left-handed plate LEFT INWARD OPENING Bevel faces towards outside Triangle faces towards outside Left-handed plate...
-
Page 10: Door Latch Adjustment
Door Latch Adjustment Having determined the door opening direction and what needs to be adjusted, you may first need to adjust the direction of the door latch on the lock body, so that it will engage correctly when the door closes. - Page 11 Lock Body Adjustment Depending on the door opening direction, you may need to switch the direction of the Lock Body for left and right swinging doors, by making adjustments to the spindle clutch. 1) Remove the screw for switching the clutch direction with a Philips screwdriver (Fig. 1). 2) Remove the Inside and Outside Handle Spindles and swap them around (Fig.
- Page 12 Door Handle Orientation Depending on the door opening direction, you may need to rotate the handles on the front and rear plates of the door unit. The procedure below explains how to do this. 1) Using a Philips screwdriver, remove the screw holding the handle in place, as shown.
- Page 13 Installing the Door Lock Installing the Lock Body 1) Measure the point where you wish to place the lock template – Typically, 1000mm to 1200mm from the bottom and 60mm from the edge of the door. 2) Mark this point. 3) Place the supplied template to line up the marker with the reference mark on the template.
- Page 14 7) Insert the Lock Body and make sure all the holes line up. 8) Screw the Lock Body in place. It’s now ready for the attachment of the front and rear door lock plates.
-
Page 15: Installing The Front Plate
Installing the Front Plate 1) Install the connecting bolts, spindles and 2) Align the front plate to the holes in the key link strip. door. 3) Affix the front plate to the door making 4) Turn the handle to make sure the rotate as expected. -
Page 16: Installing The Back Plate
Installing the Back Plate 1) Connect the cables. 2) Install the square spindle (back plate). Make sure this aligns with the double lock knob which should be vertical. 3) Affix the back plate to the door with 4) Rotate the handle to make sure the door latch works as expected and the two screws as shown. - Page 17 Adding the Device to the Smart Home Network Use the Logika Smart Home app to add the device to the Smart Home system. Please refer to the Logika Smart Mobile App user guide which will take you through the process of adding smart devices to the system.
-
Page 18: Entering Admin Mode
User Administration and Security Entering Admin Mode 1) Tap the touchpad screen to wake it up. 2) Tap the * key twice in quick succession. 3) Enter the admin code (Default is 123456) followed by the # key. 4) The display will now show you some admin options that you can use. Note: Don’t forget to change the Admin passcode from the default for complete security! Set Time Once the door lock is connected to the Smart Home system (as described previously), the time will... -
Page 19: Add New User
Add New User 1) Select Add User. 2) Select the type of user you wish to add. 3) Enter a username (up to 5 characters). 4) Type the passcode (6 digits) and/or start fingerprint recognition and/or NFC programming. Delete User Note: Delete All deletes all data relating to that user –... - Page 20 Set Always-Open (Unlocked) Mode This setting disables the security on the door lock, so that anyone can gain access without having to type a passcode, use fingerprint identification or NFC card. To disable this, after it’s been set, simply enter your passcode, fingerprint or NFC card. Enable Double Authentication This can be enabled to force each user to use two methods of authentication before they gain access.
-
Page 21: Unlocking The Door
Scene. For instance, you could engage the security cameras, turn off all the lights and heating, etc when you leave the house. Refer to the Logika Smart Mobile App user guide for information on how to set up a Scene. Leave Home Button... -
Page 22: Troubleshooting
Micro-USB Socket The issue you are experiencing is not mentioned here. Please contact us at support@logika.nz with your issue and we will do our utmost to help!