Related Manuals for logika WL-ZSPWBPWBPW-PI11-04
Summary of Contents for logika WL-ZSPWBPWBPW-PI11-04
- Page 1 Smart Lookever Camera WL-ZSPWBPWBPW-PI11-04 Product Manual Version 1.0 © 2019 Logika Limited...
- Page 2 Introduction Thank you for choosing Logika. Please take a moment to carefully read through the manual to ensure safe and proper installation and use. • Before use, the product must be properly installed as described in this manual by a qualified technician.
-
Page 3: Device Layout
Device Layout IR Lamp Status Indicator Front View Side View Device ID SET Button QR Code SD Card Slot Micro-USB Port Rear View... -
Page 4: Specifications
Features • Communication Mode: IEEE 802.15.4 IEEE 802.11 b/g/n. Smart gateway and camera. • • Full 1080p HD. • Infrared night vision, local storage, video recording and playback. • Two-way voice communication. • Motion detection and alarm. Remote access via the mobile app. •... -
Page 5: Installation Steps
Adding the Device to the Smart Home Network Use the Logika Smart Home app to add the device to the Smart Home system. Please refer to the Logika Smart Mobile App user guide which will take you through the process of adding smart devices to the system. -
Page 6: Device Functions
In this mode, the camera can act as a Gateway device, allowing addition of other smart devices on the network. This means that you do not need to use a Logika Gateway device, as this will perform the same functions. -
Page 7: Troubleshooting
You should now be free to add the device to the local smart network. The issue you are experiencing is not mentioned here. Please contact us at support@logika.nz with your issue and we will do our utmost to help!