Table of Contents
Advertisement
Quick Links
Quality Bathroom Products
Xenon 50
Art no. 46000
Xenon 120
Art no. 46300
Please Note You may need to remove the door / doors to make it easier to fit. This can be done by unclipping the hinges.
(There is a release catch at the back of the hinge). DO NOT FIT SHELVES AT THIS STAGE.
Fixing Instructions
Thank you for purchasing this HiB product.
Please read through these instructions carefully and refer back to them during installation to
ensure that your product is fitted safely and that it retains its high quality finish.
Please retain this leaflet for future reference.
Before drilling, ensure there are no hidden cables or pipes in the wall
These products are suitable for installation in zones:
Please see Figure 1 on the back page for details
Xenon 60
Art no. 46100
Xenon 80
Art no. 46200
Please Note
These products must
be installed with a
minimum distance of
150mm between the
infra-red sensor switch
and any surface or
object to ensure correct
operation of the sensor.
2
Ver No. 1.0 June 2015
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HiB Xenon 50
Summary of Contents for HiB Xenon 50
- Page 1 (There is a release catch at the back of the hinge). DO NOT FIT SHELVES AT THIS STAGE. Fixing Instructions Thank you for purchasing this HiB product. Please read through these instructions carefully and refer back to them during installation to ensure that your product is fitted safely and that it retains its high quality finish.
- Page 2 Quality Bathroom Products Angle Adjustment Angle Adjustment REAR VIEW Mounting Points Suggested location Claw In/Out Claw In/Out of internal fixing hole Adjustment Adjustment Fixing Preparation (Fig A) Fixing Brackets Hanger Adjustments (Fig B) (Fig C) Wall Hung Installation specialist fixings should be purchased from any DIY or hardware store.
-
Page 3: Operating Instructions
Door Adjustment Re-wire the cabinet as shown in the diagram (Fig D) above. HiB recommends that all electrical bathroom products should only be fitted by a base of the cabinet with the supplied screw suitably qualified, Part P registered electrician. - Page 4 HiB Ltd. Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN ©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent. All sizes and measurements are approximate, but we do try and make sure they...
Need help?
Do you have a question about the Xenon 50 and is the answer not in the manual?
Questions and answers