Whirlpool WHELJ1 How To Install, Operate And Maintain page 7

If the filtration media pores are frequently block-
ing, it may be necessary to increase the frequen-
cy of Clean Rinse cycles.
Water has objection- System is in bypass Move bypass
valve(s) to normal operating (non-
able taste and/or odor bypass)
position.
Filtration media pores are blocked Manually initiate a Clean Rinse cycle
If the filtration media pores are frequently block-
ing, it may be necessary to increase the frequen-
cy of Clean Rinse cycles.
No water flow to drain System is in bypass Move bypass
valve(s) to normal operating (non-
during Clean
Rinse bypa
ss) position.
cycle
Troubleshooting
Procedure for removing error code from display:
Unplug power supply from electrical outlet
Correct problem.
Plug power supply back in.
Wait 8 minutes. The error code will return if the problem was not corrected.
Central Water Filtration System Exploded View