Specifications - Whirlpool WHELJ1 How To Install, Operate And Maintain

whole house water filtration in the areas of Fountain Hills, AZ, Phoenix, AZ; Cave Creek, AZ and San Tan
Valley, AZ.
While testing was performed under standard laboratory conditions, actual performance of the system
may vary based on local water conditions.

SPECIFICATIONS

Model WHELJ1
Rated Service Flow Rate
Pressure Drop at Rated Service Flow 10 psig* (68.9 kPa)
Pressure Drop at 9.6 gpm
Water Pressure Limits (minimum / maximum)
Water Temperature Limits (minimum I maximum) 40-100-F (5 – 38 °C)
Drain Flow Rate
Rated Capacity at Chlorine Concentration**
0.50 ppm 2,280,000 gal.*
0.75 ppm 1,520,000 gal.*
1.0ppm 1,140,000 gal.*
1.5ppm 760,000 gal.*
2.0 ppm 570,000 gal.
Sediment Removal with 30-40 micron particle size 95% or more
Sediment Removal with 40-50 micron particle size 99% or more
* From independent laboratory test data.
** Typical residential chlorine concentration is 0.5 to 1.0 ppm.
This system conforms to NSF/ANSI Standard 42 for the specific performance claims as verified and
substantiated by test data.
Inspect Shipment
The parts required to assemble and install the Central Water Filtration System are included with the
unit. Thoroughly check the Central Water Filtration System for possible shipping damage and parts loss.
Also inspect and note any damage to the shipping carton.
6.0 gpm (22.7 L/min.)
15 psig* (103.4 kPa)
3.4 gpm
30-125 psi(206.8 – 861.8 kPa)