Advertisement
Use
The level converter is the communications interface to read up to
60 M-bus devices (simple M-bus loads).
The data is read out:
●
Locally with the ACT531 PC software via USB
●
Locally with the ACT531 PC software via the RS-232 interface
●
Via the M-bus web server WTV534.., WTV676..
●
Via Desigo CC
Up to six level converters can be connected in parallel to a M-bus web server WTV676..
(Master) on a M-bus network.
Up to 60 M-bus devices can be connected to each level converter WTV531... The level
converter can be used:
●
As individual components on a M-bus network.
●
To extend a M-bus network by up to six level converters connected in parallel.
You can also use the level converter at your own risk as an interface to suitable software and
devices by third-party manufacturers.
The level converter is protected against short circuits.
NOTICE
We recommend using a DC 24 V power supply to ensure a stable signal.
2
Smart Infrastructure
A6V10844290_en--_b
2019-10-21
Advertisement
