Programming Cooking Time; Programming Cooking Time And Cooking Stop Time; Programming The Cooking Stop Time - Teka HX-760 E Instructions For Use Manual

3 2 beeps will then be heard. The
will flash and the display will show the time
left before the alert sounds.
4 An alarm will sound at the end of the pro-
grammed time.
5 Touch any symbol to stop the alarm. The
symbol will turn off.
You can change the timer at any time by tou-
ching the symbol and later the + and –
symbols. They will then light up. The two
beeps you hear after that will confirm the new
time has been set.

Programming Cooking Time

1 Touch the symbol on the glass surface.
It will begin to flash. 00:00 will appear on
the display and the + and - will light up.
2 Touch the + or – symbols to programme the
cooking time.
3 2 beeps will then be heard. The
will flash and the display will show the time
left before the oven switches off automati-
cally.
4 Select a cooking function and temperature.
5 When the set cooking time is over, the oven
will turn off and an alarm will sound.
6 Touch any symbol to stop the signal. The
oven will turn on again.
7 Set the controls to
You can change the timer at any time by tou-
ching the symbol and later the + and –
symbols. They will then light up. The two
beeps you hear after that will confirm the new
time has been set.

Programming the Cooking Stop Time

1 Touch the symbol of the glass surface.
It will begin to flash. The current time will
appear on the display and the + and – will
light up.
2 Touch the + or – symbols to programme the
cooking stop time.
symbol
symbol
to turn off the oven.
3 The alarm will be confirmed by two beeps
and the display will show the current time,
while the symbol will remain lit to indi-
cate that the oven will switch itself automa-
tically.
4 Select a cooking function and temperature.
5 Once it is the set time, the oven will turn
off, an audible signal will sound and the
symbol will flash.
6 Touch any symbol to stop the signal. The
oven will turn on again.
7 Set the controls to
You can see the set cooking stop time by tou-
ching the symbol. You can then also chan-
ge the timer setting by using the + and –
symbols, which will light up. The two beeps
you hear after that will confirm the new time
has been set.
You can use this function even if you are coo-
king with the oven. If this is the case, follow
all of the above instructions except No. 4.
Programming Cooking Time and Cooking
Stop Time
1 Touch the symbol on the glass surface.
It will begin to flash. 00:00 will appear on
the display and the + and – will light up.
2 Touch the + or – symbols to programme the
cooking time.
3 2 beeps will then be heard. The
will flash and the display will show the time
left before the oven switches off automati-
cally.
4 Touch the symbol of the glass surface.
It will begin to flash. The current time will
appear on the display and the + and - will
light up.
5 Touch the + or – symbols to programme the
cooking stop time.
6 This will be confirmed by two beeps. The
current time will show on the display and
the symbol will light up.
7 Select a cooking function and temperature.
8 The oven will remain off with the
symbols lit up. The oven is programmed.
to turn off the oven.
symbol
and
21