Installation Of Usb Drivers For Windows; Special Instructions For Windows - PR electronics LOOP LINK 5909 Manual

Special instructions for Windows

1. You must say [No, not this time] to the following dialogue:
2. You must click [Continue anyway] in the following dialogue:
3. The installation will then continue according to the guidelines speci-
fied in "Installation of USB drivers for Windows
22 22
®
XP:
®
98SE, ME and XP".

Installation of USB drivers for Windows

Install the USB drivers while the PReset CD is still in the drive, i.e. immediately
after the PReset installation.
1. Connect Loop Link 5909 to the USB port of the PC.
2. After a short while, the "Found New Hardware Wizard" will be
shown. This guide will help you through the installation of the USB
driver.
3. Click [Cancel] in the following dialogue:
4. Click [Cancel] in the following dialogue:
®
Vista:
23