Removing The Palm-Rest And Keyboard Assembly; Prerequisites; Procedure - Dell G7 7790 Service Manual

Removing the palm-rest and keyboard
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Prerequisites

1. Remove the base cover.
2. Remove the battery.
3. Remove the memory modules.
4. Remove the speakers.
5. Remove the solid-state drive/Intel Optane memory
6. Remove the wireless card.
7. Remove the graphics-card
8. Remove the processor fan.
9. Remove the heat sink.
10. Remove the coin-cell battery.
11. Remove the touchpad.
12. Remove the hard drive (optional).
13. Remove the I/O board.
14. Remove the display assembly.
15. Remove the system board.
16. Remove the power button with fingerprint

Procedure

After performing the above steps, we are left with the palm-rest and keyboard assembly.
computer. After working inside your computer, follow the instructions in
module.
fan.
reader.

Removing the palm-rest and keyboard assembly

38
assembly
After
85