NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1. Place the fan at an angle, on the system board and connect the fan cable to the system board.
2. Align the screw holes to the holes on the system board.
3. Replace the three screws (M2x2.5) that secure the fan to the system board.
56
Replacing the graphics-card fan
Replacing the graphics-card fan
computer. After working inside your computer, follow the instructions in
25
After