Advertisement
TM
™
Installation—EVO
Upgrade Kit
™
Chapter 3: Installation—EVO
Upgrade Kit
Fig. 5:
1. Mount the cab display (1) in the cab of the machine with the hardware (2) supplied with the kit.
Make sure that the cab display is within view and reach of the operator.
Fig. 6:
2. Install one end of the display harness (1) into the connector at the back of the cab display (2).
3. Route the display harness to the back of the cab of the machine.
4. Connect the GPS connector (3) to the machine-specific GPS Y-cable.
5. Connect the other end of the GPS Y-cable to the existing GPS source.
6. At the back of the cab, connect the display harness to the CAN Bus extension harness—40ft (4).
7. Route the CAN Bus extension harness—40ft to the back of the machine.
©
13
2019 Capstan Ag Systems, Inc.
EVO Upgrade Kit
Advertisement
