Axis 291 1U Installation Manual page 16

AXIS 291 1U Video Server Rack
1
1
Blade video server
2
Screw
3
Dip switch
4
Front panel cover
Connect I/O Terminal Connector
For compatible replacement connectors, contact http://www.phoenixcontact.com, quoting: MC1.5/
12-ST-3.81 (art no 1803675).
To connect input/output devices to the I/O terminal connector, do the following:
Depending on which blade is used in the installation, see page 10 or page 11 .
1. Referring to the tables above, loosen the corresponding screw on top of the pin on
the green connector block.
2. Push the cable into the connector block and secure it by fastening the screw.
3. Once all devices are connected, push the connector block into the terminal connector
on the rear panel of the video server rack.
3
2
16
4