Sony CH-SMAC400 Installation Instructions

MID-SIZE FLAT SCREEN ROTATION ACCESSORY
(1) Rotation Assembly
(4) 10-24 x .5" Flat Head Cap Screws
(2) ¼-20 x .5" Button Head Cap Screws
(2) ¼-20 Square Nuts
(1) 1/8" Hex Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
CAUTION!
NOTE: The CH-SMAC400 adds 0.94"of depth and 6 lbs (2.72 kg) to overall installation. It is the installer's responsibility to ensure
that combined weight of screen and CH-SMAC400 does not exceed the maximum support weight of the mount.
1. Remove screen from mount or, if not installed, install interface bracket to back of screen per instruction supplied with the
interface.
2. Attach mounting buttons to Rotation Assembly, using the four 10-24 x 1/2" flat head cap screws. Make sure the buttons are
securely fastened. .
Sony Electronics Inc.
1 Sony Drive, Park Ridge, NJ 07656
P: 201-930-1000 www.sony.com/displaysystems
INSTALLATION INSTRUCTIONS
CH-SMAC400
Prior to assembly, unpack carton completely and verify contents.
FLAT SCREEN DISPLAYS ARE EXTREMELY FRAGILE.
Figure 2
Figure 1
(4) Mounting Buttons – Tapped 10-24
(1) Locking Strap
(2) ¼-20 x .5" Security Button Head Cap Screws
(1) 5/32" Security Hex Key
ATTACH
MOUNTING
BUTTONS
HERE
Figure 3
8832-000278
10/08