Mounting Instructions - VESTEL AC11 Series Installation Manualline

MOUNTING INSTRUCTIONS

1- Remove the bottom cover and wall bracket as shown in figure below.
M5*15 SCREW-T25 Tightening Torque: 4 Nm ± 0,5 Nm
2- Mount the wall mount part on the wall as specified below with using water gauge.
M6*75 SECURE SCREW-T25 Tightening Torque: 8 Nm ± 1 Nm
The dowel hole depth distance and hole diameter for electric vehicle charging station wall bracket mounting
is specified in the image below.
Figure 1
Figure 2
English - 3 -
DRAWING OF SCREW ANCHOR HOLES