Cleaning the inside of the unit
Cleaning the document feeder unit
If misfeeding occurs frequently or dirty patterns or black bands appear on a copied or transmitted document,
clean the feeder rollers, sub roller, rubber flap, white plate and glass.
1
Disconnect the power cord and the telephone
line cord.
2
Slide the front lid open lever towards the front
to open the front lid.
3
Clean the feeder rollers and sub roller with a
cloth moistened with isopropyl rubbing
alcohol, and let them dry thoroughly.
4
Clean the rubber flap with a cotton swab
moistened with isopropyl rubbing alcohol, and
let it dry thoroughly.
5
Clean the white plate and the glass with a dry
soft cloth.
6
Close the lid securely by pushing down on
both sides.
7
Connect the power cord and telephone line
cord.
Cleaning the thermal head
If dirty patterns or black bands appear on a copied, received or printed document, clean the thermal head.
1
Disconnect the power cord and the telephone
line cord.
2
Open the top cover.
3
Press the green button on the right marked
"PUSH" and lift up the head unit.
4
Clean the thermal head with a cloth
moistened with isopropyl rubbing alcohol, and
let dry thoroughly.
5
Press the head unit down firmly until it clicks
into place.
6
Close the top cover securely by pushing
down on both sides.
7
Connect the power cord and telephone line
cord.
74
Rubber flap
Sub roller
White plate
Glass
Thermal head
Caution:
¡To prevent a malfunction due to static electricity,
do not use a dry cloth and do not touch the
thermal head directly with your finger.
Feeder rollers
Front lid open lever
Caution
Do not push the
black cover.