Panasonic KX-F1150 Operating Instructions Manual page 59

» » Re-recording greeting messages
You can change the contents of a greeting message from a remote location.
1. Call your unit.
2. For the common greeting message:
Enter your remote operation ID.
For the mailbox greeting message:
J
Press and the desired mailbox number (
G
3. Press to start recording.
¡A long beep will sound.
4. Speak immediately after the long beep (up to 16 seconds).
¡If you pause for over 2 seconds while recording, the unit will beep and stop the greeting message
recording. Repeat from step 2 within 10 seconds.
5. When finished, press
¡The new greeting message will be played.
» » Changing to the TEL mode
You can change the setting of the receive mode from ANS/FAX to TEL from a remote location.
1. Call your unit.
2. Enter your remote operation ID.
OR
J
Press and the desired mailbox number (
H@
3. Press .
» » Turning on/off the pager alert
You can remotely turn on/off the pager alert for voice messages if the unit has programmed a pager
number in advance (p. 54).
1. Call your unit.
2. For the common pager alert;
Enter the remote operation ID.
For a mailbox pager alert;
J
Press and the desired mailbox number (
3. To turn on the pager alert, press
To turn off the pager alert, press
» » To skip the greeting message
Callers can record their messages without listening to the greeting message.
After calling your unit, dial
¡The unit will skip the rest of the greeting message and start recording.
A
,
I
.
A
,
A
,
HA
.
HB
.
@
during the greeting message playback.
B C
or ). Then enter the mailbox password.
B C
or ). Then enter the mailbox password.
B C
or ), then enter the mailbox password.
59