Erasing recorded messages
To erase specific messages from
memory
Press (ERASE) while the message you want to
erase is playing.
To erase all messages in common
memory
Press (ERASE) after listening to all of the
1
messages.
Press (START/SET).
2
¡If this feature is not required, press (ERASE)
or (STOP) instead of (START/SET).
Setting message alert
This feature allows your unit to alert you with a slow beep if a caller's message has been recorded in common
memory.
Press (MENU).
1
K
2
Press
, then press
Press (START/SET).
3
Press (‹) or (›) to select "ON".
4
¡If this feature is not required, select "OFF".
Press (START/SET).
5
Press (MENU).
6
Note:
¡This feature does not work with the mailbox feature.
28
ICM ERASE OK?
ERASE COMPLETED
SYSTEM SET UP
D B
.
MESSAGE ALERT
ÿŸ
MODE=OFF
[
ÿŸ
MODE=ON
[
]
]
Dial keypad
(ERASE)
(START/SET)
(STOP)
(MENU)
(START/SET)
(‹)/(›)