Remote Fax Receiving (Using An Extension Phone To Receive A Fax Message) Rrr - Panasonic KX-F1150 Operating Instructions Manual

Remote fax receiving
(using an extension phone to receive a fax message)
If you have an extension phone on the same line, it is possible to receive a manual fax message. Using the
extension phone, dial the remote fax activation code.
This saves you from going to the facsimile unit and pressing (START/SET).
Important:
¡To activate this feature, use a touch tone telephone as the extension phone and press J J (pre-selected
remote fax activation code) FIRMLY.
Receiving using an extension phone
1 When a call is received, lift the handset of the
extension phone.
2 When:
—document reception is required,
—a slow beep is heard, or
—no sound is heard,
J J
press (pre-selected remote fax activation
code) FIRMLY.
3 Replace the handset.
¡The facsimile unit is activated for reception.
Changing the remote fax activation code
This code can be from 2 to 4 digits in length using the numbers 0 through 9 and the character *.
This code should not be set to "0000".
Press (MENU).
1
K D A
2 Press , then
Press (START/SET).
3
4 Enter the new code number.
Press (START/SET).
5
Press (MENU).
6
40
SYSTEM SET UP
.
REMOTE FAX ACT.
CODE=UU
Extension phone
(START/SET)
Dial keypad
Note:
¡Some special telephone company services
will require you to enter a service access
code. If you subscribe to such services,
whole or part of the remote fax activation
code must be different from the service
access code.
To the same line
(MENU)