Advertisement
4
Before using this unit please
read these operating
instructions
carefully.
Take special care to follow the warnings
indicated on
the unit itself as well as the safety suggestions
listed below.
Afterwards
keep them handy for future reference.
Power Source -- The unit should be connected
to power sup-
ply only of the type described
in the operating
instructions
or
as marked on the unit.
2. Polarization
-- If the unit is equipped
with a polarized
AC
power plug (a plug having one blade wider than the other),
that plug will fit into the AC outlet only one way. This is a safe-
ty feature.
It you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to fit,
contact
your electrician
to replace your obsolete
outlet. Do
not defeat the safety purpose of the polarized
plug.
3. Power Cord Protection
-- AC power supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them. Never take hold of the
plug or cord if your hand is wet, and always grasp the plug
body when connecting
or disconnecting
it.
4. Nonuse Periods -- When the unit is not used, turn the power
off When left unused for a long period of time, the unit should
be unplugged from the household AC outlet.
Installation
En vironm en t
1. Water and Moisture
Donotusethisunitnearwater-forex-
ample, near a bathtub, washbowl, swimming
pool, or the like.
Damp basements
should also be avoided.
2. Condensation
-- Moisture may form on the lens in the follow-
ing cases...
• immediately
after a heater has been turned on.
• in a steamy or very humid room.
• when the unit is suddenly moved from a cold environment
to
a warm one.
If moisture forms inside this unit, it may not operate properly.
To correct this problem, turn on the power and wait about one
hour for the moisture to evaporate.
3. Heat -- The unit should be situated
away from heat sources
such as radiators
and the like. It also should not be placed in
temperatures
less than
5"C (41"F)
or greater
than
35"C
(95" F).
P]a
cem
ell t
1.
Ventilation
- The unit
should
be situated
so that
its location
or position
does
not interfere
with
its proper
ventilation.
Allow
10 cm (4")
clearance
from
the
rear
of the unit.
2.
Foreign
Material
- Care
should
be taken
so that objects
do
not fall into and liquids
are not spilled
into the unit.
Do not sub-
ject
this unit
to excessive
smoke,
dust,
mechanical
vibration,
or shock.
3.
Magnetism
-- The unit
should
be situated
away
from
equip-
ment
or devices
that
generate
strong
magnetism
4.
Stacking
-- Do
not place
heavy
objects,
other
than
system
components,
on top of the
unit.
5.
Surface
Place
the
unit
on a flat,
level
surface
6. Carts and Stands -- The unit should be used only with a cart
or stand that is recommended
by the manufacturer.
The unit and cart combination
should be mov-
,_
e9
ed with care.
Quick stops, excessive
force,
and uneven
surfaces
may cause the unit and cart com-
bination to overturn.
7. Wall or Ceiling Mounting
-- The unit should not be mounted
to a wall or ceiling, unless specified
in this operating
instruc-
tions.
Maintenance
Clean the cabinet,
panel and controls
with a soft cloth lightly
moistened
with mild detergent
solution.
Do not use any type of abrasive
pad, scouring
powder or solvent
such as alcohol or benzine.
Service
1.
2.
Damage Requiring Service -- The unit should be serviced by
qualified service personnel when:
(a) The AC power supply cord or the plug has been damaged;
or
(b) Objects have fallen or liquid has been spilled into the unit;
or
(c) The unit has been exposed to rain; or
(d) The unit does not appear to operate normally or exhibits a
marked change in performance;
or
(e) The unit has been dropped,
or the enclosure
damaged.
Servicing
-- The user should not attempt to service the unit
beyond that described
in the operating
instructions.
All other
servicing
should be referred to qualified service
personnel.
CAUTION:
• This digital apparatus
does not exceed the Class B limits for
radio noise emissions
from digital apparatus
set out in the
Radio Interference
Regulations of the Canadian Department
of Communications.
• THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS
OR ADJUSTMENTS
OR PERFOR-
MANCE
OF
PROCEDURES
OTHER
THAN
THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIA-
TION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED
PERSONNEL.
Advertisement
