Technics SL-P9066 Operating Instructions Manual page 16

Edit guide
When recording, the changer will automatically program the
tracks for tape sides A and B in accordance with the length of the
tape so that none of the tracks will be interrupted before they are
completed
In addition, the program will also include a silent interval of ap-
proximately 4 seconds between tracks
Example: Recording from a disc containing seven tracks on-
to a 60-minute tape.
Silent interval between tracks
(approx 4 seconds)
SideA(30min)•. i Track I I_ Track 1 __ Track 2' 3 Track4
Side B (30 min)
I Track5 I Track6 I Track7 _
W ..................................................
Prepare the tape deck for recording.
Set the Dolby NR, reverse mode, recording level,
etc., as instructed in the Operating Instructions for
the tape deck.
Set so that recording is possible from the beginning
of the tape.
L_ ..................................................
EDITGUIDEPress EDIT GUIDE to select
the length.
tape
Each time you press the button, the
display showing the tape length
changes as follows. Choose the length
of the tape you will use.
F* C-46 E_ C-60 [_ C-9O E_ C---_
I
'\l /
,i_ f I, I
_ -
EDIT II
I--
Illuminates
More precise time settings are also
possible.
(Refer to the instructions at right.)
3
[ ]
Numeric buttons _-
41
I-,<_1 SKIP I_.1
I I I
DISCSKIP Press DISC SKIP to select
the disc to be recorded.
Specified disc number
The display shows the data of the tracks to be recorded as
follows:
Number of tracks
to be recorded
l '\ I / 1
(<'-/>/i _ </>'_ i i
--÷ __
]
l
[Side AI
I
Tracks to be
recorded
l ,,'4
L_ / i0 /TRACK
I
Remaining time on side A
_ <,--,, - -_ I._,
I
I
Number of tracks Tracks to be
to be recorded recorded
f,'-l> /i \ < I>_ Lt _ R -/
I [Side B I
J Remaining time on side B
f <'7,>."%. - _I
(<'-_, ,_, I,/
_ ED, r ,,
In this example, disc 5 can be recorded with tracks 1 4 on side
A and tracks 5-7 on side B of the cassette tape.
16