64
–
Remove cover of centre high-mounted brake light.
–
Disconnect the plug connections of the heated rear
window and press the contact tabs onto the window.
–
Cover the painted surfaces along the window with tex-
tile adhesive tape.
WARNING!
Wear protective gloves and goggles when cutting
hardened PUR glue.
–
Pierce glue sealing material with piercing needle.
–
Draw cutting cord through the needle and insert the
cutting cord holders.
–
Cut out rear window with cutting cord along the cir-
cumference of the window.
–
Remove window with the aid of double suction cups
e.g. -V.A.G 1344-.
Removing damaged window
–
Removal is performed in the same way as for the
damaged rear window ⇒ 64-1 page 4.
Installing rear window
Install in the same way as for rear window ⇒ 64-1
–
page 5.
64-1
6
page
Glued windows
FABIA 2000
Body Work
Edition 10.03
S00.5319.13.20