Con Trol Pan El - Brandt DFH15624X Instruction Manual

For detailed operating method read the corresponding conte nt on the instruction manual.
Switch on the appliance
Fill the detergent dispenser
Check the rinse aid level
Check the regeneration
salt level
Load the baskets
Select a programme
Running the dishwasher
Changing the programme
Ad ding fo rgotte n dish es
in t he dis hwash er.
If the appliance is switched
off during a wash cycle.
Switch off the appliance
Turn off the water tap,
unload the baskets
Press the On/Off button to switch on the appliance, Open the door.
With each wash cycle.
Compartment
For programmes with pre-wash only.
(Follow the user instructions!)
Electric indicator on control panel (if provided).
(On models with water softener system only.)
Electric indicator on control panel (if provided).
If there is no salt warning light in the control panel
(for some models), you can estimate when to fill the salt into
the softener by the number of cycles the dishwasher has run.
To lo ad the baske ts, ref er to t he sec tion en titled
Close the door, press the program button until the selected programme lights up.
"
( See the section entitled Operation instruction )
T urn on the water tap and press the Start/Pause Button. The machine will start working
after about 10 seconds.
1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergent
may have already been released and the water already drained. If this is the case, the detergent
dispenser must be refilled.
2. Press the Start/Pause Button to stop washing , Then press programme button for more than 3 seconds,
the programme will cancel.
3. Press the program button to select a new programme.
4. Press the Start/Pause Button, the dishwasher will run after 10 seconds. .
1.Press the Start/Pause Button to stop the washing.
2.Open the door a little .
3.After the spray arms stop working, you can open the door
completely.
4.Add forgotten dishes.
5.Close the door
6.Press the Start/Pause Button, the dishwasher will run
after 10 seconds.
If the appliance is switched off during a wash cycle, when switched
on again, please re-select the washing cycle and operate the dishwasher
according to the original Power-on state ).
When the working cycle has finished, the buzzer of the
dishwasher will sound 8 times, then stop.
Turn off the appliance using the On/Off Button,to turn off the appliance
Warn ing: wait a f ew mi nutes (about 15 m inutes ) before unlo ading the di shwasher to avoid
hand ling th e dish es and uten sils wh ile the y are s till ho t and m ore s uscep tible to break .
The dishes will al so dry bette r. First start u nload ing th e lowe r bask ed.
"
Loa ding th e Dish wash er Bas kets
"
5
"
.
Open the do or care fully.
Look o ut for hot ste am
when openin g the d oor!