Siemens S7 Series Communication Instruction Manual page 13

3 Mode of Operation
In the gateway configuration files, KNX objects are identified by "eib..." and
Note
PROFINET objects are identified by "pnetd...".
This application example describes how to edit and customize these files so that
they can be used for data exchange (see Chapter
configuration
file with the ready-to-use sample files that you can customize for your own
application.
Note In addition, the following configuration files exist that need to be downloaded to
the gateway but not edited:

driver.cfg

ugwc1.cfg

ugwc1.txt

gateway.cfg

ntp.cfg

plants.cfg
These files are not described in greater detail in this application. If you require
more information, please contact MBS GmbH.
Communication with S7 CPU via KNX Gateway
Entry ID: 109739689, V1.0,
files). Along with this description, you are provided with a data backup
06/2017
4.4 Gateway: Editing
13