Trouble Shooting - Philips ADD4964 User Manual

Hide thumbs Also See for ADD4964:
Table of Contents

Advertisement

Available languages

Available languages

7 Trouble shooting

Trouble
1. Unit is unplugged.
Unit does
2. Main power supply is o .
not dispense
3. Damaged water dispenser.
hot and
4. The water bottle cap is not
cold water.
attached properly to the
connector on the water dispenser.
1. Over consumption of cold water in
a short time.
2. System Malfunction
Unit does
3. The ventilation around the unit is
not dispense
insu cient.
cold water.
4. The temperature of water in the
water bottle is too high. (When the
bottle is exposed to direct sunlight
for a long time.
Unit does
1. Over consumption of hot water in
not dispense
a short time.
hot water.
2. System Malfunctions
Water leaks
1. The top portion of the faucet has
from the
become loose.
faucet.
2. The faucet has been damaged.
Water is
1. The Hose Connector is not
dripping out
connected properly or the inside
of the water
hot or cold water tanks is leaking.
dispenser
2. The drain cap on the back is not
and onto
fastened properly.
the oor.
The water
This is not uncommon with new
being
water dispensers. Do not worry,
dispensed
this is not dangerous to your health.
has a strange
This water dispenser is FDA
taste.
approved.
7
Possible causes
Solutions
1. Plug the power cord into an socket.
2. Reestablish main power supply.
3. Replace the dispenser or send for
service
4. Connect properly.
1. Wait a moment for the water to cool.
2. Contact aftersales personnel for
support.
3. Space the unit from the wall by
more than 15 cm.
4. Place the water bottle in a cool
location out of direct sunlight.
1. Wait a moment for the water to heat.
2. Contact aftersales personnel for
support
1. Tighten the top threaded portion
of the faucet.
2. Contact aftersales personnel for
support.
1. Make sure the hose connector is
properly connected. Contact dealer
if a water tank is leaking
2. Tighten the drain cap. If the sealing
silicon material inside the drain cap
is torn or damaged, then replace
with a new one.
Clean the hose in the dishwasher
(top rack only) or let it soak in dish
soap. The strange taste usually goes
away after the rst bottle has been
used up.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Add4962

Table of Contents