Saw Chain Lubrication System; Inspecting Oil Cap And Strainer - Echo CS-2510TES Service Manual

48

7 SAW CHAIN LUBRICATION SYSTEM

(A) Oil cap
(B) Gasket
(C) Connector
(D) Oil tank
(E) Oil tank vent
(F) Oil strainer
(G) Oil line
(H) Auto-oiler assembly
(J) Oil line
(K) Bolt (M4)
(L) Circular washer
(M) Worm gear
(N) Oiler cover
(C)
(B)
(A)

7-1 Inspecting oil cap and strainer

A
D
SAW CHAIN LUBRICATION SYSTEM
(E)
(K)
(D)
B
C
B
B
(K)
(J)
(H)
(F)
(G)
1. Remove oil cap.
2. Inspect oil cap for cracks and gasket (A) for cuts
or damage. Replace worn or damaged parts as re-
quired.
3. Replace connector (B) if damaged.
4. Pull oil strainer (B) from oil tank using a wire
hook (C).
5. Remove oil strainer (B) from oil line (D) and
clean oil strainer in suitable solvent, or replace if
damaged.
CS-2510TES
250Ts, 250TCs
(N)
(M)
(L)