Mac And Ip Addresses Summary - THOMSON Network Router User Manual

Chapter 2: Networking

MAC and IP Addresses Summary

This table summarizes all the MAC and IP addresses that may be associated with the TCP/IP
communication stacks and USB handling in your Wireless Cable Gateway. The ones actually
used depend upon your gateway Operating Mode, as explained above. At minimum, your cable
company will need to know the MAC address associated with IP Stack 1, which is the MAC
address shown on the modem label.
Stack Name
IP Stack 1 CM WAN access - all Modes
IP Stack 2 local management - CM Mode
IP Stack 3
only
IP Stack 4
CableHome remote management
IP Stack 5
- CH Mode only
---
end-user remote management,
LAN WAN access -
RG Mode only
WAN data access -
CH Mode only
local management -
RG, CH Modes only
LAN gateway
MAC and IP Addresses
28
Purpose - Mode
MAC Address
per label on CM
assigned by cable company
during initialization
fi xed at 192.168.100.1
CM label + 1
assigned by cable company
CM label + 2
assigned by cable company
CM label + 3
fi xed at 192.168.0.1
CM label + 4
USB MAC
CM label + 5
IP Address
Chapter 2