ALDI 4832109900HD Manual page 12

GB
You will also need:
8 cement slabs:
50 × 50 × 4 cm,
approx. 22 kg
each
the assistance of
another person
1. Mount the T-stand (see fig-
ure A).
2. Set the T-stand up in the
desired location and insert
the cement slabs (see fig-
ure B).
3. Mount the rotary plate 1 on
the T-stand with 4 of the
enclosed washers 2 and
the long screws 3 (see fig-
ure C).
4. Screw mount the pole foot 4
on the rotary plate 1 with
another 4 of the enclosed
washers 2 and the short
screws 5 (see figure C).
5. Place the sleeve 6 and the
cap 7 on the pole foot.
6. Secure the sleeve 6 with
the knurled screw 8.
7. Slip the shade pole 9 over
the pole foot and fix it in
place with the knurled
screws 8 (see figure D).
14
196967 i 20181025.indd 14 196967 i 20181025.indd 14
The sun shade is now ready
for use.
Opening the shade
(see figure E and F)
Please note!
– Before opening the sun
shade, ensure that it has
a sufficiently secure posi-
tion, that is, that the prop-
er sun shade base is used.
1. If necessary, remove the
hook and loop strip 16 and
the protective sleeve (see
figure O).
2. Gently open the sun shade
by hand. Turn the crank 10
in the process and open
the shade completely.
Tilting the shade
(see figure G)
1. Push the locking mecha-
nism 11 in the handle 12.
2. Slide the handle 12 up or
down.
3. Let the handle 12 lock in-
to the desired position and
let go of the locking mech-
anism 11.
25.10.2018 07:52:49 25.10.2018 07:52:49