Table of Contents
Advertisement
1.
2.
Click "Next"
3.
Click "I accept"
NOTES: The meter is supplied with a 9 pin DB9 RS232 cable. In order to establish
communication with the meter the correct COM PORT must be selected in the 451126
Software. To find out what COM PORTS are available go to Windows Device
Manager>Ports. It is here the COM PORTS will be listed.
If using the meter with a Serial to USB Adaptor make sure you install the driver that is
rd
supplied with the 3
party adaptor. Once this is done ,check under Windows Device
Manager>Ports and make sure that the brand name of the Serial to USB Adaptor is
listed here. Note what COM PORT it has assigned. Make sure that in the 451126
Software you select the COM PORT it is assigned to in order to establish
communication.
4.
Click "Next"
5.
6
.
Reboot PC
8
Model 451126 V2.0 6/08
Advertisement
Table of Contents
Need help?
Do you have a question about the 451126 and is the answer not in the manual?
Questions and answers