Karaoke Function; Configuration Menu - THOMSON DVD80K User Manual

KARAOKE FUNCTION

A microphone and a 2m cable with an Ø 6mm plug are
included.
Connect the (22) cable to the (21) microphone.
• Connect the plug to the corresponding sockets: (19)
and (20) to enable the karaoke function.
• Turn the ON/OFF switch on the (21) microphone to the
ON position.
• On the audio setup, select AUTO on MIC SETTING.
CD RIPPING
CONVERSION OF AN AUDIO CD TO MP3 AND COPYING
IT TO AN USB FLASH DRIVE
The device enables conversion of audio tracks to MP3
format to save them on an USB drive connected to the front
of the player.
Procedure:
• Insert an audio CD into the DVD player.
• Upon playback start, press SUBT/CD RIP: The CD
Ripping menu will appear on the screen.
• Select the tracks for conversion and press ENTER to
confirm.
Tracks are played normally while the MP3 files are saved to
a folder on the USB flash drive. The ripping progress bar will
appear on the screen.
When conversion is completed, press EXIT on the menu.
To play converted tracks, press DVD/USB.
Note: Available only for USB flash drives, not for memory
cards.
READING FUNCTION
READING MPEG4/MP3/JPEG FILES
When a JPEG file is selected, an image preview is displayed
on the left of the window.
To enable display of a JPEG image on the TV screen, use
the direction keys to select it and then press ENTER to
accept.
MP3 File Menu
While playing an MP3 disk, 2 menus can be selected by
pressing the PROG key: List of files and file folders
List of files
Select files using the direction keys (s and w) or through the
numeric keypad, then press ENTER to accept.
File folder
Select folders using the direction keys (s and w), then press
ENTER to accept.
DVD PLAYER
DVD80K

CONFIGURATION MENU

Accessing the Configuration menu
The DVD player's configuration menu is accessed using the
television screen and the remote control.
• Press SETUP on the remote control: the SETUP menu
is displayed.
• Select a page from the SETUP menu and press
ENTER.
• Select an option and press ENTER to access other
settings.
• Select the settings and press ENTER.
• Greyed-out settings are not available or cannot be
changed.
• Within a menu, press w to return to the main menu.
• Press SETUP to leave the configuration menu.
Attention: manufacturer software updates must be certified
by an authorized agent.
Updating the software yourself may cause the device to
malfunction.
GENERAL SETTINGS MENU
TV System
TV output colour system depending on the television:
NTSC, PAL, or AUTO. Default setting: PAL.
USE
23 EN