Table of Contents
Advertisement
2_DTH8005_en
9/03/04
Further information
Remote control - Code A-B
Remote control setting on code B
No. to key in
3000
Code A
3001
Code B
Note: the remote control of your DTH 8005 is set to code A (3000). To set it to code B (3001) follow the
procedure described below.
1.
Press and hold the
2.
With the number keys, press
3.
Release the
DVD
DTH 8005 setting on code B
1.
Switch on your DTH 8005.
2. Check that there is no disc in the disc tray.
3.
Simultaneously press the
them when your DTH 8005 displays
4.
Try to control your DTH 8005 with the remote control.
Note: in the event of a problem, redo the setting of both components:
the remote control and your DTH DTH 8005.
Technical data
Power requirements 220 to 240 V - 50/60 Hz
Power consumption:
• Operating
• Standby
• Standby, ECO mode = 5 W
Functioning conditions +5°C to + 35°C surrounding humidity: 80 % maximum
Playback system Laser diodes - Wave length: 655 / 780 nm, Laser power CLASSE 2
Reception norms LL' - BG - I - DKK'
Number of storable channels 99
Remote control Infrared 33 Khz - Batteries 2 x 1.5 V (AAA)
Nominal Specification - THOMSON reserves the right to change the specifications without notice. The
characteristics and aspect of the product may be changed without prior notification.The colour and aspect of
the product may differ from that represented in this manual.
17:21
Page 60
On display panel
DVD A
DVD B
key.
DVD
,
,
,
.
3
0
0
1
key.
,
PLAY/PAUSE
AV
DVD B
.
= 36 W
= 15 W
60
keys at the front of your DTH 8005 and release
DTH 8005 - EN / RST - BEI / 03-2004
Advertisement
Table of Contents
