Adjustment During Massaging With Auto-Course Or In Quick Mode - FujiFilm EC-3000 Manual

Adjustment during massaging with AUTO-COURSE or in QUICK MODE

START
STOP
/RESET
AUTO FUNCTION
AIR
REPEAT
HEIGHT
ADJUSTMENT
SKIP
MENU
SHDR
ENTER
W/H
FOOTREST RECLINER
RESET
FORWARD BACK
1. To adjust the strength of Mecha. (knead balls)
2. To adjust the strength of air massage.
ARM
LEG
3. To adjust the shoulder position/knead ball position.
massaging.
Adjust by pressing the
the [ENTER] button.
Strength of Mecha. (knead balls) massaging can be adjusted
at 7 steps.
This is set initially at the
strength step 4.
Adjust by pressing the
the [ENTER] button.
Air-massage strength can be adjusted at 5 steps.
This is set initially at the strength step 3.
For adjustment of
air-massage strength on the
shoulder/arm, refer to P28.
When the knead balls are positioned around
shoulders or back, press the [▲] or [▼] buttons
for HEIGHT ADJUSTMENT, and press the [ENTER]
button.
The shoulder position is adjustable with the [▲] or [▼]
buttons pressed once and then with the
pressed. At this time, the knead balls can be moved
back-and-forth with the
Massage is applied at the position adjusted during the
movements of the "NECK RELAX", "EXTREME KNEAD"
and "EXTREME TAPPING" in the AUTO-COURSE. (This is
effective only for the "REJUVENATION" course of
"WHOLE BODY" and "SHOULDER".)
Around shoulders or back
24
button and then press
button and then press
button for adjustment.
button
One scale:
about 12mm
One scale:
about 2mm