FujiFilm EC-3000 Manual page 18

How to Use the AUTO-COURSE
START
STOP
/RESET
AUTO FUNCTION
AIR
REPEAT
HEIGHT
ADJUSTMENT
SKIP
MENU
SHDR ARM
ENTER
W/H LEG
FOOTREST RECLINER
RESET
FORWARD BACK
4. The course name selected is displayed. When the
AUTO-COURSE starts, a process of detecting your
body shape also starts.
When the "7MIN" course is selected,
the process of detecting your body
shape is not taken.
5. In the process of detection, the detection points are
lighted up, and the detection levels each of the points
are indicated with the detection indicator.
* When nobody is seated on the chair, or when nothing can be
detected, a message "CAN NOT DETECT BODY SHAPE"
comes out on the LCD. In this case, press the [AUTO]
button again, and try to detect the body shape again.
6. With the body shape detection completed, the knead
balls move to the shoulder position as determined.
7. Should you feel the shoulder position not in good
fitness, finely adjust its position as desired. While a
beep sound is caused, press the
adjustment, and press the [ENTER] button.
At this time, the knead balls can be moved to back-and-forth
with the button for adjustment.
The massage is applied at the positions adjusted during the
movements of "NECK RELAX", "EXTREME KNEAD"
and "EXTREME TAPPING" in the AUTO COURSE. (This
is effective only with the "REJUVENATE" course for the
"WHOLE BODY" and "SHOULDER".)
17
button for
One scale: about 12mm
One scale: about 2mm